Mounting
5
3 Mounting
3.1 Dimension Drawing
Figure 4 Dimensions for DIN-Rail Mounting (unit: mm)
Caution:
As part of the heat dissipation system, the switch housing becomes hot during operation. Please use
caution when coming in contact and avoid covering the switch housing when the switch is running.
The figures in this manual are only for reference.
3.2 Mounting Modes and Steps
The series switches support DIN-rail and panel mounting. Before installation, make sure that the
following requirements are met.
1) Environment: temperature (-40
℃
to 75
℃
), ambient relative humidity (5% to 95%,
non-condensing)
2) Power requirement: The power input is within the voltage range of the switch.
