Figure2-45 STP Port Configuration
Table2-8 STP Port Configuration
Item Description
Port State Display the spanning tree status of each port in the switch.
Path Cost
The given path cost for the switch to decide which port is to
forward. The smallest one will be the forwarding port, the
range is 1~ 65535, the default value in IEEE 802.1D is
10Mb/s = 50-600
；
100Mb/s = 10-60
；
1000Mb/s = 3-10. To
change the values, you need to re-set the switch.
Priority
By this setting, you can set the port as root, the value range
is 0-255, 128 is the default. The smaller value, the higher
priority. To change the value, you need to re-set the switch.
2.2.3.2
SNMP Configuration
From this page, you can define the host PC as trap manager and input
SNMP’s community name. You can also define the name, location and
contacts for the switch. This page is including three next menus:
“
System
Options”
、
“
Community strings”
、
“
Trap Managers”
