11
2
3
4
Turn OFF the water control valve
before connecting the water
supply tubing to the machine.
Attach the 90° elbow connectors
to water input and output ports
on the back of the machine.
Connect water supply tubing to
the elbow connector.
Caution
Inlet and outlet check
◼
Ensure the water inlet and outlet are connected correctly. Refer to Page 9 Unit
Back diagram. If the unit is used with the inlet (IN) and outlet (OUT) reversed,
then it will cause severe internal damage to the hydrogen cell and the unit will
stop working. This error is not covered under the product warranty.
Installation
Turn to the
position OFF
