KWorld PLUSTV 1440ex, Руководство пользователя

Страница: 8 / 18

5
set is over.
6. Display button: If this button is clicked, the number of the program you are
watching will be displayed.
7. Video button: Clicking this button continuously, you can change over the mode
among TV/ Video/ S video/ YPbPr circularly.
8. Mode button: Clicking this button continuously, you can change over the picture
mode among the four set modes, i.e. bright, standard, soft and preset. At PC
mode, this button is used for the right movement of window.
9. Menu button: Used to enter into and exit from menu.
10. P and Program - buttons: These two buttons are used to increase and
decrease program number, and they are also used to move cursor up and down
during menu operation.
11. and Volume - buttons: These two buttons are used to adjust volume
and are also used for adjustment in menu.
12. NICAM button: Only supported in PAL-I Nicam model.
13. Still Picture button: Used to still the picture of TV or video program. At PC mode,
it is used for the left movement of PIP window.
14. Output Mode button: Used to adjust the resolution and refresh rate of output
picture. (Note: You can click this button continuously to adjust the resolution and
refresh rate, or you can click the button, use P+ and P- to select item and then
use VOL+ to realize the function.)
15. TV Wall button: Used for multi-channel preview.
16. Aspect Ratio button: Used to adjust picture aspect ratio, i.e. the changeover
between 4:3 and 16:9.
17. PIP button: When there is PC signal input, you can click this button to enter into
PIP function.
18. Factory Default button: You can click this button to resume the factory default
setting. (Note: If wrong operation by user causes no display on the monitor, you
shall press this button for a long time so as to resume the factory default
setting.)
19. HD button: Not support in this model.