KWorld DVB-T380U, Часто задаваемые вопросы

Страница: 12 / 13

Q11: Cannot scan any/all Digital channel after finishing Digital channel
scanned process? (Digital series)
A11:
1) Please check Digital antenna are connected to the Product Digital received
socket properly, and put the antenna to the place where have great signal
accepting, and scan again.
2) You can try to connect household Antenna (must support UHF/VHF).
Remember adjust the antenna to face the digital broadcast transmitter.
Or
3)If the Product is the USB interface:
Please check whether your motherboard supports the USB2.0 format or not
first. And please confirm the USB Driver was installed properly.
Please go to
『
Device Manager
』
=>
『
Universal Serial Bus Controllers
』
, check
below word
『
Enhanced
』
in red.
If there is no
『
Enhanced
』
in your Device Manager, it means your motherboard
only supports USB 1.1 or the USB2.0 function doesn’t be enabled in BIOS
setting.