KWM Gutterman IronMan Half-Round G2, Руководство по эксплуатации и техническому обслуживанию

Страница: 6 / 23

5
SECTION 2
SAFETY AND GENERAL MAINTENANCE
1.
Read the entire manual prior to operation of this machine.
2.
Always keep covers and lids on during transportation, operation and storage. The covers are for the
operator’s safety. Not only will this protect the operator against injury, the covers protect the machine
from outside elements.
3.
Read all warning labels on machine.
4.
Disconnect the machine from power source prior to cleaning, or performing any maintenance.
5.
Perform a daily inspection for debris, loose nuts, and or bolts. With a clean machine you can expect
longer life from your machine and a better-finished product.
6.
Lubricate guillotine and chains weekly using
WD40
.
7.
OUTSIDE STORAGE. If machine must be stored outside on an open trailer, tarp machine loosely
providing good ventilation to prevent condensation.
8.
BE SURE the operator is trained in the operating procedures of this equipment, and all local and
national safety codes concerning the operation and the lifting of coils.
MOUNTING MACHINE
Mounting machine in truck and or trailer.
1. When choosing a vehicle or trailer for your machine, consider the gross machine weight including
coil.
2. Check mounting surface for its integrity and make any repairs necessary prior to installation.
3. Bolt machine to the bed of the vehicle using 3/8" dia. bolts grade 5 four places. DO NOT DRAW
MACHINE DOWN TO AN UN-FLAT SURFACE. Shim as needed to insure four place mounting.
*REMOVE MACHINE FROM WOODEN SHIPPING SKID*