A
B
W
F
Parts in the box
Latch
“B” is not included. If needed,
please contact Kwikset to order
a drive-in latch for your lock.
Exterior
Assembly
Strike
Adapter
ring
C
D
E
Keys
Mounting
Plate
SmartKey
Tool
G
H
03809
46780
N
Q
S
P
Fasteners
48654
27526
64109
Interior
Assembly
K
L
M
T
U
V
A
N or P
(2x)
N
P
S
Q
A
A
B
B
B
A
B
If drilling a new door, use the supplied template and the complete
door drilling instructions available at www.kwikset.com/doorprep.
Note: Additional door preparation may be
required for doors with 1-1/2" (38 mm) holes.
Consult the deadbolt drilling instructions at
www.kwikset.com/doorprep.
or
backset
Measure to confirm that the hole in
the door is either 2-1/8" (54 mm) or
1-1/2" (38 mm).
Measure to confirm that the backset is
either 2-3/8" or 2-3/4" (60 or 70 mm).
2-3/8" or 2-3/4"
60 or 70 mm
1-3/8" – 1-3/4"*
35 – 44 mm*
Measure to confirm that the hole in
the door edge is 1" (25 mm).
Measure to confirm that the door is
between 1-3/8" and 1-3/4"* (35 mm
and 44 mm*) thick.
A
A
B
C
D
B
C
D
Is the door edge chiseled?
Are the latch holes centered in the door hole?
Which latch are you installing?
Hold the latch in front of the door hole, with the latch
face flush against the door edge.
2-1/8"
54 mm
1-1/2"
38 mm
1"
25 mm
YES
YES
NO
NO
Use latch “A”. If the
latch bolt is not already
extended, extend the
latch bolt as shown.
No adjustment is required.
Proceed to next step.
Rotate latch face as
shown to extend latch.
wood
block
actual
size
Use latch “B” (not
included). If the latch
bolt is not already
extended, extend the
latch bolt as shown.
Latch “A”
Latch “B”
S
(2x)
C
Q
(2x)
Longer screws
install closest to
the door jamb.
door frame
E
Install strike on the door frame.
Make sure the hole in the door frame is drilled a
minimum of 1" (25 mm) deep.
or
chiseled
not
chiseled
or
or
1
Prepare the door and check dimensions
2
Install the latch and strike
*Service kits for 2-1/4" (57 mm) thick doors
are available through Kwikset.
1 / 4
62888 / 01
Installation and User Guide
Kwikset
1-800-327-5625
www.kwikset.com
ENGL
IS
H
Required tools
Ruler
4 AA Batteries
Hammer
Wood block
Phillips head screwdriver
Additional Tools (depending on application)
