***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Movable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
5. Insert two 3/8” square nuts and optional wheel hardware into each base.
Note: If installing optional wheels
(model# 10B409), insert two threaded channel spacers (metal) from wheel option package.
Omit if
wheel option has not been purchased. Temporarily install a 3/8” x 7/8” hex bolt to keep hardware from sliding
out of channel. If not using threaded channel spacers, install bolt in 3/8” square nut. Tighten bolt hand tight.
Crossbar
Base
Base
Temporary
3/8" x 7/8" Hex Bolt
12"
3/8" Square Nut
Threaded Channel Spacer (metal)
(For wheel option 10B409)
3/8" Square Nut
Base
Threaded Channel Spacer (metal)
(For wheel option 10B409)
NZ323 Rev. 01/31/19
