NZ298 Rev. 07/17/17
Hardware
Note: Hardware may be packaged separately
in one or more boxes. Open all packages
before beginning assembly.
3/8“ x 1 3/4” Hex Bolt
(Part# TZ227)
(28)
3/8" x 7/8" Hex Bolt
(Part# TZ249)
(6)
3/8“ Lock Washer
(Part# TZ65)
(30)
3/8“ Flat Washer
(Part# TZ60)
(34)
3/8” Lock Nut
(Part# TZ197)
(4)
3/8" Square Nut
(Part# TZ247)
(6)
5/16" Eyebolt
(Part# TZ270)
(2)
5/16" Flat Washer
(Part# TZ269)
(2)
5/16” Lock Nut
(Part# TZ5)
(2)
Assembly Tools
9/
16
1/2”, 9/16” & 3/4”
Wrenches
Ratchet with
1/2”, 9/16” & 3/4”
Sockets
Scissors
AND
Post Braces (2)
(Part# UZ737)
Channel Spacer (12)
(Part# UZ812)
Backstay Brace (2)
(Part# VZ328P2)
Ground Anchor (4)
w/hardware
(Part# UZ727)
Backstay (2)
(Part# VZ328P1)
Net (1)
(Part# 3B6825)
Net Strap (1)
(Part# 10B4405 Pack of 2)
Net Clip (80)
(Part# 10B3101 Pk of 100)
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
