Kwik Products HT0816B, Операционное обслуживание комплектующих и уход, Страница: 5 / 10

ASSEMBLY INSTRUCTIONS HT0816B
FRONT WHEEL ASSEMBLY
No front wheel assembly required.
HANDLE ASSEMBLY
Install handle assembly to blower, place rubber shim (1)
under handle strut (2) and place 5/16-18 x 2 bolt (4) and 3/ 8
washer (3) into holes in handle strut (2) and through frame
(5) and tighten (not all the way) with 5/16 washer (6) and 5/
16-18 nyloc nut (7). Place handle (8) into handle struts (2)
and align holes in handle (8) and struts (2). Place 5/16-18 x
2 bolt (4) and 3/8 washer (3) into strut (2) and handle (8), as
shown, and tighten with 3/8 washer (3) and 5/16-18 nyloc
nut (7) Tighten bolts on strut frame at this time.
Throttle Assembly
No assembly required.