NZ410 Rev. 12/02/16
***CAUTION***
This training equipment has been designed to be used for training only. Training equipment must be anchored AT ALL
TIMES and shall be secured against overturning. Do not climb on the net or frame at any time! All fastenings must be
checked to insure they are fully secured before and after each use of this product. Training equipment not in use must
be disassembled and properly stored in a safe, secure area. Assembled training equipment should not be left
unattended. Do not use this equipment during the threat of high winds. Training equipment should be checked for
safety before and after each use. All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
Lift
Post
Post
WARNING
UNDER NO CIRCUMSTANCES SHOULD A HAMMER BE USED TO HIT GROUND SHOE INTO SOIL.
USING A HAMMER ON GROUND SHOE WILL CAUSE DAMAGE TO GROUND SHOE.
A PILOT HOLE PEG HAS BEEN PROVIDED FOR HARD SOIL CONDITIONS.
Step 9.1
Pilot Hole Peg
1” to 2”
Hammer into
ground until 2” of
pilot hole peg left.
Post
Ground Shoe
Place one foot on ground shoe plate as
close to the post as possible and push into
ground until ground shoe is completely in
the ground
Step 9.3
Step 9.2
Pull pilot hole peg
straight out of hole
9.
Push one ground shoe into field surface with foot as shown in step 3. If soil conditions are hard, mark
ground shoe location and use pilot hole peg and follow steps 9.1 through 9.3.
8. Training frame is designed for one person set up, so lift
one post at a time and stand goal up.
