KWIK GOAL 9B9301 Скачать руководство пользователя страница 2

Страница: 2 / 6

Note: Make sure the open end of shade tube is at the top.

3. Starting at one location, attach shade tube and tube clamp assembly to Kwik Bench

(Not Supplied)

as shown.

Lock Nut

Kwik Bench

(NOT Supplied)

Kwik Bench

Shade Tube

Open End

Clamp Nut Side

Tube Clamp Assembly

Clamp Screw Side

Clamp Lock Nut Side

Corners

NZ447 Rev. 04/16/20

Do not overtighten screws.

4. Tighten screws until clamp is snug on Kwik Bench and shade tube as shown.

5. Attach remaining tube clamp assemblies to all four corners on Kwik Bench as shown in steps 3 and 4.

Do not overtighten screws.

As low as possible

As high as possible

***CAUTION***

In slight wind, Kwik Bench Shade will cause assembled unit to overturn without any person or weight on Kwik Bench.

In windy conditions this unit could be damaged, come apart, or cause injury

Содержание 9B9301

Страница 3: ...hown 8 Insert the second shade rod frame assembly into shade pocket Shade Rod Frame Assembly Shade Start Start End End Shade Shade Rod Frame Assembled CAUTION In slight wind Kwik Bench Shade will cause assembled unit to overturn without any person or weight on Kwik Bench In windy conditions this unit could be damaged come apart or cause injury ...

Страница 5: ... rod into shade pockets at each end as shown and secure to tension rod with velcro tab Center Shade Tension Rod End shade Tension Rod Velcro Tab Velcro Tab End Shade Tension Rod CAUTION In slight wind Kwik Bench Shade will cause assembled unit to overturn without any person or weight on Kwik Bench In windy conditions this unit could be damaged come apart or cause injury ...