ASSEMBLY
INSTRUCTIONS
FOR
9B9301 KWIK BENCH SHADE
1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging immediately. Wet or
damp packaging may damage contents.
2. Read through entire instruction before beginning assembly and installation.
NZ447 Rev. 04/16/20
Kwik Bench
(NOT Supplied)
Shade (1)
Carry Bag (1)
Center Shade Tension Rod (1)
Frame Assembly (2)
Shade Rod
End Shade Tension Rod (2)
Tube (4)
Rod Assembly
Assembly (8)
Tube Clamp
Assembly Tools
Phillips Screwdriver
P1
***CAUTION***
In slight wind, Kwik Bench Shade will cause assembled unit to overturn without any person or weight on Kwik Bench.
In windy conditions this unit could be damaged, come apart, or cause injury
04/16/20 - Change dim of “Connector Tube” on page 2 from 2”
to “As high or low as possible”. CS
04/16/20 - Created - CS
Revisions:
140 Pacific Drive Quakertown, PA 18951
800-531-4252 Kwikgoal.com
2019 Rev 2020 Kwik Goal Ltd.
©
