6. After installing anchor weights, test as described below to verify effectiveness of anchor system.
***CAUTION***
All sports equipment must be anchored at all times. Sports equipment not in use must be
disassembled and stored in a safe, secure place. Assembled sports equipment should not be left
unattended. Do not use this equipment during the threat of high winds. Sports equipment should
be checked for safety on a regular basis. Any modifications to this or any Kwik Goal product will
void any and all warranties.
NZ237 Rev. 02/18/14
Crossbar
247 lbs.
INSTRUCTIONS FOR PERFORMING SOCCER GOAL ANCHOR TEST
1. Verify goal has been assembled according to manufacturer’s instructions.
2. Inspect goal for damage, broken parts, and loose hardware. Replace any broken parts and be sure all hardware
is tightened properly before performing test.
3. Anchor goal in accordance with manufacturer’s instructions. If using counterbalance weight, be sure the
correct amount is being used.
4. Clear all persons from a minimum 50 foot radius surrounding the goal.
5. Verify goal is attached to anchors according to instruction.
6. Apply a horizontal pull force of 247 lbs. to the center of the crossbar for 60 - 70 seconds.
Full safety precautions must be taken while performing test.
7. If goal overturns during application of force or does not return to an upright position after removing force, an
alternate anchoring system must be used.
