3
Water heating unit WHU110/200 -12V_24V
MAY CHANGE WITHOUT PRIOR NOTICE
WARNING STICKER
Dynaset dispatch department includes one (1) warning sticker bag per one (1) main product.
Product recipient is obligated to fix determinate warning sticker to Dynaset product.
Fix sticker to visible and appropriate place or close to Dynaset product where it’s easily seen.
Before fixing sticker clean surface with solvent detergent.
READ OPERATION INSTRUCTIONS. RISK OF ELECTRIC SHOCK. BEWARE OF HOT SURFACE.
SAFETY PRECAUTIONS
The hydraulic system is usually pressurized up to 250 bar.
In order to avoid
damages and
accidents operator and maintenance personal must act in compliance with the
laws, regulations and recommendations issued by local electricity and work safety authorities.
Follow all your local safety instructions related to electric devices and the high-pressure hydraulics.
TECHNICAL CONDITION OF YOUR MACHINERY AND EQUIPMENT MUST BE SUBJECT TO CONSTANT
SURVEILLANCE.
Hydraulic system of a carrier machine should be maintained according to the service program.
All couplings, valves and hoses should be maintained tight and clean as well as kept under constant
observation.
Leaks in the hydraulic system must be fixed immediately to avoid injuries caused by high pressure and oil
blowouts.
Prior to maintenance, detaching from a carrier or disassembling a DYNASET-unit, the hydraulic system of a
carrier machine should be stopped and DYNASET’s hydraulic circuit depressurized.
When operating or maintaining in the immediate vicinity of DYNASET hydraulic unit or accessories, appropriate
protective clothing, safety goggles, gloves, ear and eye protection should be worn.
Do not touch parts heated by hydraulic oil.
EXTERME CLEANLINESS MUST BE MAINTAINED WHEN CARRYING OUT ANY SERVICE
DISSASSEMBLING OR REPAIR OF UNIT AND HYDRAULIC SYSTEM. THIS IS CRUCIAL TO ENSURE
SAFE, RELIABLE AND LONG-LIFE OPERATION OF YOUR EQUIPMENT.
Prevent freezing nozzles, water circuit and pipeline. Draining and air flushing have to perform before
ambient temperature reaches 0°C (32°F).
Fuel and its vapors are extremely flammable and explosive. Fire or explosion can cause severe burns or death.
Engines give off carbon monoxide, an odorless, colorless, poison gas. Breathing carbon monoxide can cause
nausea, fainting or death.
Unintentional sparkling can result in fire or electric shock. Unintentional start-up can result in entanglement,
traumatic amputation, or laceration. See appendix engine manual.
All installation and service of both hydraulic and electric equipment must be performing experienced personnel
only.
November 2014 JLe