56 | kvm-tec
kvm-tec | 57
3. EXTENDER sETTiNgs
3. EXTENDER sETTiNgs
3.8.2 fIRMWaRe UPdate WItH USb StIcK
For the update with an USB stick the following steps are necessary
1. you receive the message that you can plug in the USB stick.
2. copy the update file (ending in .kvm) to the USB stick
3. make sure that the update file is directly on the stick and that it is not in any
subdirectory
4. the USB stick must be formatted with FAT-32
3.9 UnlocK an UPGRade
1. Make sure the main menu is open.
2. Press the M key. The Options Overview menu opens. The device ID will be shown.
3. Order the unlock code from your supplier by providing them with the 9-character device ID
and the serial number of your KVM-extender.
4. Press M key to enter the unlock code.
5. Enter the unlock code your supplier provided.
6. The extender will automatically restart.
7. To confirm the upgrade has been unlocked return to the Options Overview menu and check
that the relevant upgrade is now displayed in green
3.9.1 enable oR dISable USb MeMoRY UPGRade
The USB Memory upgrade allows the user to enable or disable the memory upgrade. When
the USB Memory upgrade is enabled, USB flash storage and external storage devices can be
accessed via the extender. If your extender was provided with the USB Memory upgrade you
can enable and disable at any time.
1. Make sure the main menu is open.
2. Press the M key. The Options Overview menu opens. The current USB Memory status is
displayed (Enabled or Disabled).
3. Press 1 to enable or 0 to disable the USB Memory upgrade.