KVM-TEC 6850, Руководство пользователя

Страница: 6 / 14

10 | kvm-tec
1. introduction
1.5 ABOUt tHe stAtUs Led
The Status LED (8/15) can light red, orange or green. Table 1 shows the meaning of each colour.
Also see chapter
Troubleshooting .
Normal operation
* MX only ** Rem. Only
Meaning of LED indicators
colour Blinking Physical
link
active
connection
video
extended
UsB
Initialisation
UsB data
Received
Identify
command
autoupdate
mode
Red - Yes No No Update Failed
Red Slow No No No
Orange - Yes Yes No
Orange Fast Update in Progress
Green - Yes Yes Yes Update Succedded
Green V. fast Yes**
Red/Green V. fast Yes
Yellow - No
Yellow Slow Yes
Green - Yes
Green V. fast Yes
main Led
RJ45 Socket lEDs *
kvm-tec | 11
1.6 UNPaCKING aND ChECKING ThE CoNTENTS
Before using the product for the first time it should be checked for damage. In case of
damage due to transport inform the carrier immediately. Before delivery the product is
checked for its function and its operating safety.
• Make sure that the packaging contains the following content:
Gateway
local/CPU Unit
1 x kvm-GW local/CPU
1 x wall power supply unit 12 V 2A (EU-plug or Int plug)
4 x rubber feet
1. INtROdUctION
1.7 mOUNtINg OptIONs
1.7.1 MoUNTING PaDS aND RUBBER FEET
The mounting pads and rubber feet can be used to hold the extenders in place and prevents
them from sliding and falling.
To attach the mounting pads or rubber feet:
1. Remove the protection layer from the mounting pads or rubber feet (G).
2. Attach the mounting pads or rubber feet (G) to the bottom the units.