background image

28    |    kvm-tec

kvm-tec    |    29

7. cABLe ReqUIRemeNts

Pin

color

1

orange

/White

2

orange

3

green

/White

4

Blue

5

Blue

/White

6

green

7

Brown

/White

8

Brown

7.1 rEQUIrEMEnTS For CAT5E/6/7 CABlES

A Cat5e/6/7 cable should meet the following requirements:
•  The pins are connected 1:1. 

Caution:

 the cable pairs must be twisted to EIA/TIA- 568A (rare)  

 

or EIA/TIA-568 B (common) pairs. 

•  Erroneous assignments cannot be found with a simple cable tester. 
•  The pins for the green pair of wires are not adjacent to one other. 
•  The cable must at the very least meet the CAT5 specifications and be suitable for Gigabit  
 

transmission. 

•  The cable should meet one of the following standards: Class D ISO/IEC 11801:2002   
 

or EN 50173-1:2002. Schema EIA/TIA-568 B.

•  Only use shielded installation cable with min. cross section of 24 AWG throughout    
 

the length.

•  The shield should be contiguous and connected to both ends. A shielded patch cable is  
 

 allowed for connection to the device.

schema eIA/tIA-568 B

8 ReqUIRemeNts NetWORk sWItcH

The entire switching network system requires its own dedicated network. For security reasons it 
cannot be integrated into an existing company network.

The network switch must fulfil the following specifications: 

1 gigabit Switch, with true port to port transfer rates of 1 gigabit/second

 

8. ReqUIRemeNts NetWORk-

sWItcH

8.1 RecOmmeNded sWItcHes

A list of kvm-tec tested and recommended switches can be found on our website at

www.kvm-tec.com 

Products 

- Switching System - Datasheet -recommended Switch

Содержание 6031

















Отзывы: