INSTALLATION
All the connectors are on the rear panel. The rear panel is shown as following:
AS-21UA
AS-41UA
：
Mouse interface
：
Keyboard interface
：
Monitor interface
：
Speaker interface
：
Host signal interface
：
Host audio interface
：
microphone interface
Before installing, please make sure that all the devices are power off, and then do the following:
1. Plug the mouse, keyboard, monitor and speaker into their respective port on console section.
2. Plug the signal cable of host and audio connector into their respective port on console panel.
3. Plug the USB connector of the other end of signal cable into USB interface on host, the VGA connector
into video card output interface and the audio connector into sound card output interface.
4. Power on any host computer to supply power. You can access and control one computer after you switch to
the port attached to it.
