KVH, TracVision, and the unique light-colored dome with dark contrasting baseplate are registered trademarks of KVH Industries, Inc.
All other trademarks are property of their respective companies. The information in this document is subject to change without notice.
No company shall be liable for errors contained herein. © 2015-2018 KVH Industries, Inc., All rights reserved.
54-0995 Rev. D| 72-0648
1
TracVision TV1/RV1 Main Board
Replacement Instructions
Technical Support
If you need technical assistance, please contact KVH Technical Support:
North/South America, Australasia:
Phone: +1 401 847-3327
Email: [email protected]
Europe, Middle East, Asia-Pacific, Africa:
Phone: +45 45 160 180
Email: [email protected]
See this procedure in action!
Scan this QR code with your mobile device to view
the video at
The following instructions explain how to replace
the main board in a TracVision
®
TV1/RV1 antenna.
Tools Required
This procedure requires the following tools:
• ESD wrist strap
• #2 Phillips screwdriver
• #2 Phillips torque screwdriver set to 5 in.-lbs
• #2 Phillips torque screwdriver set to 11 in.-lbs
• 7/16" torque wrench set to 15 in.-lbs
• 7/16" open-end wrench
• Alcohol cleaner and lint-free cloth
• Laptop computer with the latest version of
TV1/RV1 software downloaded from the KVH
Partner Portal
Step 1 - Replace the Main Board
Follow the steps below to replace the main board.
a.
Power off and unplug the TV-Hub to disconnect
power from the antenna.
CAUTION
Make sure the antenna is pointed away from the
sun whenever the radome is removed. The high-
gloss reflector can focus sunlight into a narrow
beam, generating a significant amount of heat
that can cause damage and injury.
Figure 1: Main Board (Cover Not Shown)
Содержание TracVision TV1/RV1
Страница 7: ...7...
