KVH Industries TracVision R4SL, Руководство по установке

Страница: 9 / 19

10
Follow the steps below to wire your receiver(s).
a. Connect the RF1 cable from the antenna to
the grounding block, as shown in Figure 15.
Label this grounding block connector “RF1.”
b. If you connected an RF2 cable in “Wire the
Antenna” on page 8 , connect the RF2 cable
from the antenna to the grounding block.
Label this connector “RF2.”
NOTE: If you need to connect three or more receivers,
refer to Appendix A on page 19 .
c. If you are connecting two receivers to the
TracVision system, decide which receiver
will be the primary receiver. The primary
receiver controls satellite selection.
NOTE: Unless a KVH Master Receiver Selector is
installed, the secondary receiver will only be able to
select channels carried on the satellite that is currently
selected by the primary receiver.
d. Connect the supplied 5-foot RF cable from the
“RF1” connector on the grounding block to
the “Satellite In” connector on the primary
receiver (see Figure 15).
e. If you are connecting a second receiver,
connect an RF cable from the “RF2”
connector on the grounding block to the
“Satellite In” connector on the secondary
receiver.
f. Connect the receiver(s) to the customer’s
television(s). Follow the instructions in the
receiver’s manual.
Figure 14: Augat IT1000 Connector Installation Tool
If you cut the RF cable(s) or used additional
RF cabling, be sure to terminate all RF cables
with Snap-N-Seal
® F-connectors using an
Augat IT1000 connector installation tool
(KVH part #19-0242). Screw-on, push-on,
twist-on, and other low-quality connectors
will degrade system performance.
IMPORTANT!
Figure 15: Grounding Block and Receiver Wiring
S econdary
Receiver
(Optional)
SATELLITE IN
OUT TO TV
TV ANT/CABLE IN
AUDIO VIDEO S-VIDEO PHONE JACK
R L
S ATELLITE
IN
Primary
Receiver
SATELLITE IN
OUT TO TV
TV ANT/CABLE IN
AUDIO VIDEO S-VIDEO PHONE JACK
R L
S ATELLITE
IN
RF2
(Optional)
RF1
Grounding
Block Grounding
Block
RF2
(Optional)
RF1
(Five-foot Cable)
RF1 Label RF2 Label
Antenna
Wire the Receiver(s) 8