manualshive.com logo in svg

KVH Industries TracVision G4, Техническое руководство, Страница: 56 / 155

Поделиться
Скачать
KVH Industries TracVision G4 Скачать руководство пользователя страница 56

Installation

54-0147

51

Installing User-defined Satellites via the Maintenance Port

1. Type 

HALT<cr>

to put the antenna in Idle mode.

2. Enter the 

SATINSTALL

parser command:

Command:

SATINSTALL,<sat_a_name><sat_b_name><cr>

Where:

<sat_a_name> = the name of your choice for
Satellite A (for example: USER1)

<sat_b_name> = the name of your choice for
Satellite B (for example: USER2)

If you only want to install and track one satellite,
enter 

NONE

as the name of Satellite B.

3. Once you’ve assigned satellites as Satellite A and

Satellite B, you need to tell the antenna which of
the two satellites it should initially acquire and
track. This step should be performed the first time
a satellite is selected, allowing the system to
download the channel guide. To do so, enter the
following parser command:

Command:

@L,A or B<cr>

Where:

A = track Satellite A
B = track Satellite B

4. Type 

ZAP<cr>

to restart the antenna.

Examples of the user-defined satellite configuration process are
provided for reference in the next two sections.

Содержание TracVision G4




























































































































































Отзывы:

Нет отзывов