TracPhone V7
1
Elevation Limit Switch Replacement Instructions
TracPhone
®
V7 Elevation Limit Switch
Replacement Instructions
The following instructions explain how to replace the elevation limit
switch in a TracPhone V7.
Tools Required
a.
Turn off and unplug the modem and control unit.
b.
Using a #2 Phillips screwdriver, remove the #10-32
screws securing the radome to the baseplate. Carefully
lift the radome straight up until clear of the antenna
assembly and set it aside in a safe place.
Figure 1 Removing the Radome
• #1 Phillips screwdriver
• #2 Phillips screwdriver
• Needle-nose pliers
CAUTION
For your own safety, be sure to disconnect power from all wired
components before performing this procedure.
#10-32 Screw
Limit Switch
54-0517 Rev. A
