KVH Industries TracPhone V30, Руководство по установке

Страница: 23 / 39

Set Up the System
22
TracPhone V30 Installation Guide
Configure the Built-In Wi-Fi Settings
With Wi-Fi enabled, vessel devices can connect to the
VSAT-Hub via its built-in wireless access point (WAP) and
receive IP addresses from the VSAT-Hub via DHCP. At the
fourth page of the wizard, you can make changes to the
following Wi-Fi settings:
• BUILT-IN WI-FI : set to “ON” or “OFF”
• SSID (WI-FI NETWORK NAME) : enter a unique name
for the Wi-Fi network
• BAND : select either 2.4 GHz or 5 GHz
• CHANNEL : select either Auto or 1-11 channels
• PASSWORD : change the password (at least 8
characters)
Figure 33: Configuring the Built-in Wi-Fi Settings
When you are done, select Next . At the final screen, select
Exit Wizard to go to the login page, and enter the admin
credentials to access the web interface.
Update the System Software
From the web interface, you can ensure the latest software
is installed in the system. Follow these steps to check for
updates and install new software, if desired.
1. At the web interface, select the Software Updates
tab. Then select CHECK NOW .
Note: In Software Versions , note the current “Antenna”
software version.
2. If an update is available, select CHOOSE FILE .
3. Select BROWSE and navigate to the file you saved on
your laptop.
Figure 34: Updating the Software
4. Select CHECK FILE .
5. At the confirmation message, select UPDATE .
6. Wait for the software update to complete. It might take
up to 30 minutes. The VSAT-Hub’s lights will alternate
green and orange while the update is in progress.
Once complete, the web interface will report that the
latest version is installed.
Note: This procedure explains how to update the software
using the web interface and your laptop computer.
However, you can also update the software using the KVH
Manager mobile app, or, if the system is activated, via the
antenna’s Internet connection (airtime charges may apply).
Details are available in the Help.
IMPORTANT!
Establishing a wireless connection onboard a steel
vessel might require a special external WAP and
advanced networking expertise.
IMPORTANT!
For the customer’s protection, an open Wi-Fi
connection without security protocols is not permitted.
Setting Built-in Wi-Fi to “On” will simultaneously
activate WPA-PSK security and will require creating a
Wi-Fi password or user login.