3
Step 3 - Inspect the Feed Tube
If the feed tube riser and shield are sealed with tape,
as shown in Figure 4 or Figure 5, continue to
If no tape is present, clean the surface with alcohol
and secure the riser with twelve 3" (8 cm) pieces of
the supplied Kapton tape, applied in vertical,
evenly distributed bands around the feed tube (see
Figure 5). Center the pieces of tape at the seam
between the shield and riser and smooth toward the
ends.
If the feed tube riser is loose or dislodged, contact
KVH Technical Support. The riser may need to be
replaced.
Figure 4: Gray Tape Applied at the Factory
Figure 5: Kapton Tape Applied in the Field
