2
Pack the Antenna
You
must
return the following components:
Follow the instructions below to prepare the
antenna for reshipping.
Step 1 - Prepare the Shipping Pallet
If the original shipping pallet is not available,
follow these instructions to prepare a
replacement.
a.
Using a light hammer and center punch,
mark the locations for the four mounting bolt
holes in the pallet (see Figure 1).
b.
Drill a 5/8" (16 mm) hole at the four
mounting bolt hole locations. Later, you will
insert four 1/2"-13 bolts through these holes
to secure the antenna to the shipping pallet.
TacPhone V11-IP or V11-HTS antenna
Quantity: 1
Figure 1: Minimum Replacement Pallet Dimensions
57.50"
(146.05 cm)
2 x 6 (x6)
(5.08 x 15.24)
57.50"
(146.05 cm)
4 x 4 (x3)
(10.16 x 10.16)
9.75"
(247.70 cm)
Ø0.63" (Ø15.90)
Bolt Hole (x4)
9.75"
(247.60 cm)
Bolt Hole Close-Up
Ensure that the replacement shipping pallet is
strong enough to support the weight of the
antenna (240 lbs (109 kg)) and that its
measurements meet or exceed the dimensions
IMPORTANT!