KVH Industries TracPhone F55, Руководство по установке

Страница: 5 / 157

4 4
2. Remove the antenna unit from its shipping carton and set the
radome aside in a safe place.
3. At the mounting site (or a stub mast’s mounting platform), lay out
the four mounting bolt holes and cable access hole as shown below.
The cable access hole must be located on the starboard side and
must measure at least 2" (50 mm) and no greater than 3
1
⁄
2
" (90 mm) in
diameter, large enough to access the antenna unit’s baseplate
connector.
4x 0.5"
(4x 13 mm)
26.2"
(665 mm)
12.0"
(305 mm)
6.0" (152 mm)
6.0" (152 mm)
12.0"
(305 mm)
DOME
5.0"
(127 mm)
2" Minimum
( 50 mm Minimum)
FWD
Antenna Baseplate Mounting Hole Pattern, Top View