KVH Industries SAILOR 4300, Инструкции по настройке и активации

Страница: 1 / 3

KVH, CommBox, and TracPhone are trademarks and mini-VSAT Broadband is a service mark of KVH Industries, Inc. Iridium and Iridium
Certus are registered trademarks of Iridium Satellite LLC. SAILOR is a registered trademark of Thrane & Thrane A/S (trading as Cobham
SATCOM). The information in this document is subject to change without notice. No company shall be liable for errors contained herein.
© 2019 KVH Industries, Inc., All rights reserved. 54-1323 Rev. A
1
Important!
Before you begin, you must first install the SAILOR 4300 system as described in the Installation and
Maintenance Manual. Download the latest version of this manual, along with the SAILOR 4300 firmware
update and BDU configuration files from the KVH Partner Portal (www.kvh.com/partners).
SAILOR 4300 for Iridium Certus
KVH Configuration and Activation Instructions
Technical Support
Europe, Middle East, Africa, Asia-Pacific:
+45 45 160 180
mvbsupport@kvh.com
North/South America, Australasia:
1 866 701-7103 (U.S. only) or +1 401 851-3806
mvbsupport@kvh.com
The following supplemental instructions explain
how to configure and activate the SAILOR
®
4300
system for Iridium Certus
®
service from KVH.
Step 1 - Connect the Analog Phone
KVH provides an ATA (analog telephone adapter)
with the system to allow you to connect a standard
analog telephone. Follow these steps and refer to
Figure 1 to connect the phone.
a. Using the supplied Ethernet cable, connect the
“LAN” port on the BDU to the “Internet” port
on the ATA.
b. Using an RJ11 phone cable, connect the analog
phone to the “Phone 1” jack on the ATA.
c. If the customer requires a second phone line,
connect a second analog phone (not supplied) to
the “Phone 2” jack on the ATA.
d. Using the supplied adapter, connect the ATA to
the vessel’s AC power.
NOTE: For more details about the ATA, refer to the
ATA’s Quick Start Guide.
Step 2 - Connect to the ICM
If the SAILOR 4300 will be used as a backup to a
mini-VSAT Broadband system, connect any LAN
port on the BDU to the designated User Ethernet
port on the TracPhone
®
system’s ICM (see example
in Figure 2). KVH’s Field Service department will
provide a network diagram showing the port number for
your CommBox configuration.
Figure 1: Analog Phone Connection
BDU
ADU
ATA
LAN
Internet
Phone 1
Analog
Phone
Power
Adapter
AC Power
DC 5V
Power
Figure 2: ICM Connection (Example)
BDU
LAN
ICM
B2
User Ethernet 3