Operation
71
Swath deposit
The following basic types of swath deposit are possible:
•
»Single swath with two rotors«
•
•
•
Single swath with
two rotors
In dual rotor operation, the swath is sent from the front rotor to the rear
rotor.
Switch on the PTO shaft at a low engine speed, and increase to the
ideal speed of 350 - 450 rpm. Do not exceed the maximum speed
of 540 rpm.
Select a driving speed at which the crop is picked up cleanly and
completely.
Night swath [+]
The optional night swath equipment makes it possible to deposit the
crop in two parallel swaths (night swath function). To use the night
swath function, use the steering rod to offset the machine by a 30
degree angle.
Switch off the tractor and secure it.
Loosen the locking pins on the rear wheels of the left-hand rotor
and set to freewheel.
Set the tine lifting on both rotors to late lifting.
See »Tine lifting«, page 46.
Open the ball valve on the steering rod.
Extend the steering cylinder using the tractor's single-acting
hydraulic control device.
Close the ball valve.
Switch off the tractor and secure it
Before you dismount, switch off the tractor and secure it against
rolling away. An unsecured tractor and machine may run you over
or trap you. Serious or fatal injury may be caused as a result.
Содержание VF6585
Страница 100: ...EC Conformity Declaration 100 ...
