80
Driving on the road
If the transport wheels are not on the equaliser bar:
> Push in the lock on the equaliser bar and push up the transport
wheel, until the lock engages
If the transport wheels are in working position at the equaliser bar
(Transport wheels are pointing upwards):
> Unlock the transport wheels and remove from the equaliser bar
> Turn transport wheels into the transport position and push the
equaliser bar on again until the interlocking device engages
> Parking the machine on the ground and uncoupling
> For coupling, drive the tractor up to the front of the drawbar of the
lengthways transport attachment
> Couple the machine to the drawbar
> Pull up the parking legs on the lengthways transport attachment
and the frame and lock
Coupling hydrauli-
cally folding
lengthways transport
attachment
> Fold in the track markers
> Pull down the support legs at the frame and lock
> Uncouple machine at the three-point
> Drive tractor up to the front of the lengthways transport attachment
> Couple the machine to the drawbar
> Couple both hydraulic tubes at the double-acting control valve
> Open the ball valves at the rear cross shaft
> Actuate control unit. The cross shaft is automatically lowered, the
transport wheels fold into transport position.
> Close the three-way ball valve
> Move the parking legs upwards at the frame and lock them
Lock for the transport
wheel
Equaliser bar
Track marker
Drawbar
Ball valves
