Safety
5
Safety
This chapter describes general safety information regarding this prod-
uct. Each part of this user manual will also contain its own specific
safety information.
Safety decals
For your safety, safety decals are placed on significant spots on the
machine. Please do not remove them. If they becom illegible or begin
to peel off, replace them with the appropriate spare stickers.
For placement of the safety decals, refer to the CLG-II-CLC tines as-
sembly manual.
Meaning
The meaning of the safety decals is pointed out below.
Read the operation manual and follow the instructions.
Initial operation of the machine must not take place before the opera-
tion manual has been read and understood.
Do not stand between tractor and machine.
Standing between tractor and machine increases the risk of crushing.
This complies especially when coupling the machine to the tractor.
Machine stand.
Do not stand under or near the machine unless it is properly support-
ed. When uncoupling, use the machine stand. Tipping of the machine
may lead to damage or injury.
Crush danger
Machine parts move when the machine is being operated. Keep clear
of the danger area.
Crush danger
Operating of the machine may result in the shrinking of gaps. Beware
of crush danger. Keep clear of the danger area.
Retighten bolts and nuts
Regularly retighten all bolts and nuts on the machine. This is of special
importance after the first hours of use. Unnoticed loosening of bolts and
nuts may lead to damage or injury.
Tightening torque bolted clamps
Bolted clamps must be tightened with 589 - 638 Nm (60 - 65 kpm).