Kvaser U100S-X3 User’s Guide
11 (24)
3.7
LED Indicators
A Kvaser U100S-X3 device has two traffic LED bars where part of each LED bar is
also used as a status area. The TX LED Bar has a status area towards the USB
end of the bar, and the RX LED bar has a status area towards the CAN end of the
bar. This is shown in Figure 7.
Figure 7: The TX and RX LED bars on the Kvaser U100S-X3 include status areas.
Different colors are used for different types of information and different blink
patterns define the current state, see Table 3 and Table 4 on Page 12.
Color
Information type
Yellow
Traffic
Green
Status
Red
Error
White
Alert
Blue
System
Table 3: Different types of information.
Kvaser AB, Mölndal, Sweden — www.kvaser.com
