Kvaser U100P User’s Guide
9 (22)
Figure 4: Not all devices are synchronized via MagiSync in this setup.
Hardware in the Device Tree of “Kvaser Device Guide” in your computer’s control
panel. If all your hardware is placed in one Kvaser MagiSync Group, then you are
ready to go.
When connected correctly, all units are synchronized achieving a high precision
virtual clock accurate to the microsecond.
3.4
CAN connection
The Kvaser U100P has one CAN channel.
The CAN connector for the Kvaser U100P is the 9-pin D-SUB connector (see
Figure 5) which has the pinout described in Table 2 on Page 10.
Figure 5: The 9-pin D-SUB CAN connector.
Kvaser AB, Mölndal, Sweden — www.kvaser.com
