Figure 8: The TX LED bar lights up from the USB side to the CAN side of the unit,
while the RX LED bar lights up from the CAN side to the USB side of the unit.
Page 13 shows two different bus load conditions. The image on the left shows the
unit transmitting and receiving data corresponding to 50% bus load in each
direction for a total of 100% bus load. The image on the right shows the unit
transmitting data corresponding to 100% bus load.
Figure 9:
The total size of the LED Bars is proportional to the bus load. Both
images indicate a bus load of 100%.
Kvaser AB, Mölndal, Sweden — www.kvaser.com
