Kvaser Memorator Light User’s Guide
16 (23)
5.5
Updating the firmware
Connect the Kvaser Memorator Light to your PC with the USB cable. Double-click
on the file “update.exe”. The Kvaser Memorator Tools can also update the Kvaser
Memorator Light firmware directly (see the online help for more information). A
small application opens where you should see the device listed if correctly
connected to your PC (see Figure 5 on Page 16). Select the device to program and
click the
Next
button
Figure 5: Firmware update, select device.
Click on the
Start Upgrade
button to start programming. The programming takes
approximately 20 seconds. The progress is printed on the screen, and typically
looks like in Figure 6 on Page 17.
No error messages should appear.
If you see error messages,
try to disconnect and reconnect the device, and then perform the
operation again.
To verify that the firmware is updated, double-click on “Kvaser Hardware” in the
Control Panel. Select “Kvaser Memorator Light” in the tree view to the left, and
click on either channel. The firmware revision information appears in the right half
of the window.
Kvaser AB, Mölndal, Sweden — www.kvaser.com
