Kvaser Leaf Installation Guide
11(17)
Kvaser AB, Mölndal, Sweden
— www.kvaser.com
4 Hardware installation
You need to install your Kvaser Leaf once (but only once) for
each
USB port you want to use
on your computer. This is a design feature of Windows.
Drivers installed?
Install the Kvaser Leaf drivers if you have not already done so.
Plug in the hardware.
Plug in your Kvaser Leaf
into a free USB port on your PC
(the computer does not need to be turned off).
The Welcome dialog.
In a few seconds the dialog in Figure 7 will pop up. You do
not need to insert the Kvaser CD although the dialog says you should. Instead, just
select "Install the software automatically", and then press the "Next" button.
Note
:
You must have Administrator's rights to do this, or the operation will fail. In Windows
XP, Service Pack 2 or later, you will be asked if you want to connect to Windows
Update. Here you should answer "No, not this time" and then press the "Next"
button. Connecting to Windows Update is harmless but can take a long time.
Figure 7: The Found New Hardware dialog
