16
/
18
16
DVB Streamer User Manual 1.00
--
-- The 'TUNER' group;
--
TUNER_MODE read-write Tuner mode Analog/DVB-C/DVB-T
FREQUENCY read-write Tune frequency
ATV_INPUT read-write Input 0=A or 1-B
ATV_COLOR read-write 0-PAL_NTSC or 1-SECAM
ATV_SPECTRUM read-write 0-Normal; 1-Invert
ATV_TRANS read-write 0-Terrestrial; 1-Cable
ATV_SYS read-write 0-B;1-GH;2-M;3-N;4-I;5-DK;6-
L;7-LP;
DVBT_INPUT read-write Input 0-A or 1-B
DVBT_BW read-write Default bandwidth
6/7/8(default)
DVBT_SPECTRUM read-write 0-Normal, 1-Inverted
DVBC_INPUT read-write Input 0-A or 1-B
DVBC_BW read-write Default bandwidth
6/7/8(default)
DVBC_QAM read-write Default constellation
16/32/64/128/256
DVBC_SYMBOLS read-write Default symbol rate 1000 -
7000
DVBC_SPECTRUM read-write 0-Normal, 1-Inverted
TUNE_SAVE COMMAND Save tuner configuration
TUNE_NEXT COMMAND Go to next carrier
TUNE_PREV COMMAND Go to previous carrier
CARRIER_STATUS read-only Single frequency mode tuner
status.
--
-- The 'RTSP' group;
--
RTSP.PORT read-write RTSP port configuration
(Default:554)
RTSP.FILTER read-write RTSP input IP filter
RTSP.ADDRESS read-write RTSP address if device behind
router(Default:empty string) uses current IP
RTSP.PROG write-only Select RTSP program to stream
--
-- The 'STREAMING' group;
--
STREAM_PROTOCOL read-write Select streaming protocol
OFF/UDP/RTP/RTSP
STREAM_TYPE read-write Select MPEG TS stream type
MPTS/SPTS
STREAM_COUNT read-write Select stream count for SPTS
only
STREAM_VLAN read-write Select default streaming VLAN
--
-- The 'PROGRAMS' group; Programs commands
--
PROGRAMS.REMOVE COMMAND Command to delete all programs
from the list
PROGRAMS.DELETE COMMAND Command to delete all programs
from the list