Kval DL-2, Инструкция по эксплуатации

Страница: 32 / 68

Side-Lite Template Set-up
PLACE SIDE
-
LITE TEMPLATE ON TABLE AND OPEN IT UP
1”
WIDER THAN THE
SIDE
-
LITE
.
PLACE SIDE
-
LITE INTO TEMPLATE AND POSITION THE HEAD END AGAINST THE
INDEX STOPS
.
FEED TEMPLATE WITH SIDE
-
LITE INTO THE DL
-2
AND STAGE IT AGAINST DOOR
STOP
.
PUSH THE DOOR CLAMP BUTTON TO CLAMP THE UNIT IN PLACE
.
CHECK TO MAKE SURE THAT THE HEAD OF THE TEMPLATE AND THE SIDE
-
LITE
ARE BOTH AGAINST THERE RESPECTIVE STOPS
.
CUT A RECTANGULAR CUTOUT USING THE END STOPS AND THE TEMPLATE BAR
SET
-
UP
.
ONCE THE TEMPLATE HAS BEEN MACHINED THEN UP CLAMP THE UNIT AND FEED
IT OUT OF THE MACHINE THEN REMOVE THE SIDE
-
LITE
.
******See Illustrated Drawing on the Following Page.