KV2 Audio ESP1000, Руководство пользователя

Страница: 9 / 19

8
ESP1000 · F
ea
tur
es · Rear panel
ESP1000 · Features · Rear panel
Rear Panel
1) AC Mains Switch
The ESP1000 has combination AC mains switch/circuit breakers on the rear panel. If either of the switches shut off during
normal use, push it back to the ON position once. If it will not stay on you should take the unit to qualified service personnel
to have it serviced.
2) Inputs
As well as being a high quality four channel amplifier solution the ESP1000 is capable of working in "Bridge Mono" Mode.
This requires the utilisation of two channels working together to produce a larger single output - suitable for driving large
subwoofers. If Bridge Mono Mode is used, only channel input 1 and 2 can be used. The signal for the subwoofer is produced
within the internal crossover. Bridge Mono Mode has its own power output.
3) PowerCon Power Connectors
The ESP1000 accept standard PowerCon terminated AC Mains cables. The ESP1000 uses one connector per two channels.
4) Fans
The cooling fans operate continuously while the ESP1000 is on. An internal temperature sensor increases the speed
of the fans during high temperature conditions. Air enters through the front grille and exits through the rear. Be sure
to allow adequate air flow to the front of the rack in which the ESP1000 is mounted.
5) Main Outputs - 1, 2, 3, 4 - outputs for each channels
Each channel of the ESP1000 is equipped Neutrik Speakon® connectors on the Main Outputs.
The minimum recommended output is 4Ω. When operating in Bridge Mono Mode, the minimum recommended output is 8Ω.
6) Output Bridge
Output for Bridge Mono Mode.
4 4 2 2 5 5 6 1
3