Installa
tion
ESD5
Installation
3
Installation
The ESD5 is supplied with a single „ESD5 Wall Bracket“, 2 locking screws with spacers and one 3mm Allen
key. Each ESD5 is equipped with two oval mounting apertures designed for easy vertical or horizontal
attachment to the ESD5 Wall Bracket.
To enable fixing to a ceiling or alternatively to the wall, measure out the center point of the ESD5 Wall
bracket. There are two extra holes on the Wall Bracket, designed to accept locking screws - this side
belongs on the rear side of the ESD5 cabinet.
Fix the Wall bracket using one center countersunk screw. Rotate the Wall bracket around the central screw
and set the correct angle of the bracket.
Fix the Wall Bracket using the remaining four countersunk screws. Position the ESD5 on to the Wall
Bracket‘s pin heads and fix it sliding the cabinet down. When mounting the ESD5 on the ceiling, slide the
cabinet backward and fix/secure it using two locking screws and tighten using the supplied Allen key.
4:5
WALLMOUNT BRACKET ESD5
PRODUCT NAME:
PRODUCT CODE:
KVV 987 344 (included with the product)
4:5
7:10
7:10
1:1