background image

NOTE

!

CAUTION

C

!

14. Unplug this unit during lightning storms 
      or when unused for long periods of time.
15. Do not connect an EPAK2500 output in 
      parallel or series with any other 
      EPAK2500’s output. Do not connect the 
      EPAK2500 output to any other voltage 
      source, such as battery, mains source, or 
      power supply, regardless of whether the 
      EPAK2500 is turned on or off.
16. Refer all servicing to qualified service 
      personnel.

 

Servicing is required when the 

      EPAK2500 has been damaged in any way, 
      such as when the power-supply cord or 
      plug has been damaged; liquid has been 
      spilled or objects have fallen into the 
      EPAK2500; rain or moisture has entered 
      the unit; the unit has been dropped; or 
      when for undetermined reasons the unit 
      does not operate normally.
16. Do not remove covers. Removal of the 
      cover will expose hazardous voltages. 
      There are no user serviceable parts inside 
      and removable may void the warranty.
17. An experienced user shall always supervise 
      this professional audio equipment.

How to use this manual

As you read this manual, you’ll find figures 
and diagrams to help you understand and 
visualise what you’re reading. You’ll also find 
numerous icons that serve as cues to flag 
important information or warn you against 
improper or potentially harmful activities.

Icons used include

Introduction

“NOTE” identifies an 
important or useful piece 
of information relating to 
the topic under discussion.

“CAUTION” gives notice 
that an action can have 
serious consequences and 
could cause harm to 
equipment or personel, 
delays, or other problems.

Important safety instructions

1 Read all product instructions.
2. Keep printed instructions, do not throw 
    away.
3. Respect and rewiew all warnings.
4. Follow all instructions.
5. Do not use this unit near water, in 
    unprotected out door areas or in rain 
    or wet conditions.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
8. Install in accordance with KV2 Audio's 
    recommended installation instructions.
9. Do not install near any heat sources such 
    as heat radiators, heat registers, stoves 
    or other apparatus that produce heat.
10. Do not defeat the safety purpose of the 
      grounding type plug. A grounding type 
      plug has two blades and a third grounding 
      connector. The third  connector is 
      provided for your safety. 

      If the provided plug does not fit into your 
      outlet, consult an electrician for 
      replacement of the obsolete outlet.
11. Do not use this EPAK2500 if the power  
      cable is broken or frayed. Protect the  
      power cable from being walked upon or 
      pinched particularly at the plugs and the 
      point where it exits from the apparatus. 
12. Only use accessories specified by 
      KV2 Audio.
13. Follow the mounting instructions.

CAUTION:

Installation should only be done 
by experienced professionals.

!

CAUTION

Page | 4

Содержание EPAK 2500

















Отзывы: