9
PRIME 80
Operating Instructions -
ENGLISH
4.5.- Hold:
Release the winch handle, it will remain in position by the action of the
winch’s automatic brake.
4.6.- Descent:
Turn the winch handle anti-clockwise, until the profile is completely fol
-
ded down.
4.7.-
Transport:
When transporting / carrying the lift it is necessary to fold the tower by
retracting all the profiles completely. Then close the sliding support piece and fix it with
the safety lock and tightening the knob.
5.- MAINTENANCE.
5.1.- All cables must be checked regularly. Faulty cables must be replaced immediately.
Do not use the lifter with faulty cables as it is potentially very dangerous. Only use DIN
3060 cables, supplied from an authorised dealer.
5.2.- The lifter is delivered ex factory completely greased. Depending on its mechanical
use though, we recommend that the crown wheel of the winch, the pads & bushings of
the drive shaft, the handle thread and the profiles of the lift are periodically greased.
ATTENTION:
Do not apply oil or grease to the brake mechanism.
The brake discs have been pre-greased with a special heat and pressure resistant grea-
se. To avoid malfunction to the winch brake, no other products must be used except the
original provided by the company. It is not necessary to grease the brake discs.
5.3.- Your lifter should be inspected at least once a year by a specialized / authorized
service centre.
5.4.- Only original Kuzar spare parts must be used to guarantee the reliability and ope-
rational safety of your lifter. The user shall lose all warranty claims if he uses anything
other than original spare parts or modifies this product in any way.
5.5.- In case a spare part is required please indicate the reference number which can be
found in the spare parts list at the back of this manual.
