background image

9

8

HOW TO ASSEMBLE

Firmly insert the compression silicone 
into the slot below the pulp spout.

The Juicer may leak if not assembled 
properly.

Note   |

The juicing screw needs to be locked in 
place in order to close the drum lid.

Note   |

Juicer will not operate if parts are not 
assembled properly.

Note   |

STEP 1

 

Top-set Assembly

STEP 2

Top-set and Base Assembly

Assemble the strainer into the rotation 
wiper then place this assembly in to the 
juicing bowl ensuring the red dot 

● 

on 

the strainer is aligned with the red dot 

 

on the juicing bowl.

Place the juicing screw into the strainer. 
Turn and press down on it until it clicks 
into place.

Place the drum lid on to the juicing bowl 
aligning the red dot 

 on the drum lid 

with the red dot

 ● 

on the juicing bowl. 

Turn clockwise to close, aligning the red 
dot 

 on the drum lid with the close 

mark    . 

Check Before
Operating

•  Wash the parts before fi rst use.

•  Ensure that the compression silicone and silicone ring are assembled properly.

1

2

3

4

5

7

Place the pulp cup under the pulp 
spout and place the juice cup under the 
juice spout as shown in the illustration.

Place the drum lid on the juicing bowl. 
Align the down arrow 

 on the drum 

lid with the   OPEN mark on the base 
and turn to the   CLOSE position.

Open

Close

Detachable 

Open/Close mark on the top-set.

6

For easy assembly hold the drum lid 
by grabbing the feeding tube and turn 
clockwise as shown in  the illustration.

TIP

Содержание M6 B6000

















Отзывы: