Kustom Profile 200, Руководство пользователя

Страница: 10 / 12

kustom.com
Profile 200 Powered Mixer Specifications
Output Power 5% THD 85 Watts Using one output jack, 8 Ohm load
120 Watts Using one output jack, 4 Ohm load
150 Watts Using both output jacks, 8 Ohms per jack
200 Watts Using both output jacks, 4 Ohms per jack
Accepted Inputs CH 1 - 5 Mic XLR Balanced,
Line 1/4”” Balanced/Un-balanced
Playback RCA Line Level Stereo, mixed mono
Frequency Response 20HZ-20kHz Actual response is tailored to speaker
cabinet for accurate acoustical response.
Hum & Noise -65dB Residual Noise, all level controls 0%
(minimum)
-50dB Nominal System Noise, all level controls
at 50%
System Gain
(Measurements
made at 1kHz)
+75 dB Mic to Speaker Output (CH 1 - 5)
+60 dB Line to Speaker Output (CH 1 - 5)
+35 dB Playback to Speaker Output
+50 dB Mic to Preamp Output (Insert Ring)
+50 dB Mic to Record out
+25 dB Power amp in (Insert Tip) to Speaker Output
Channel EQ (Tone) 1 band 1.5kHz and above ±12dB Low frequencies not affected
Master EQ (Bass, Mid, Treble) 200Hz and below, 1.5kHz centered, 4kHz and above, ±12dB
Effects Reverb
Phantom Power +15v Mic inputs (Ch 1 - 5)
Power Requirements USA/Canada 120VAC/60Hz, 400 Watts nominal
Europe 230VAC/50Hz, 400 Watts nominal
UK 230VAC/50Hz, 400 Watts nominal
Australia 240VAC/50Hz, 400 Watts nominal
Japan 100VAC/50-60Hz, 400 Watts nominal
Dimensions & Weight mm/Kilogram 320 (Height) X 226 (Width) X 250 (Depth),
7.8 Kilogram
Inches/Pounds 12.6 (Height) X 8.9 (Width) X 9.8 (Depth),
17.2 Lbs