１０
1.) Guitar Input Jack
- this is a 1/4" , 2 conductor input jack for plugging in your instrument. It is intended for guitars but
will accept other instruments as well.
2.) Gain -
adjust this control clockwise to increase the amount of distortion. Use in the lower ranges (counter clockwise) to
produce less distorted or
＂
Bluesy
＂
tones. As you increase the gain (clockwise), the amount of distortion can range from
＂
Classic Rock
＂
to Total Attack saturation.
3.) Volume (Lead)
- this is a volume control for the LEAD channel only.
4.) Channel Select Switch -
this switch selects between the LEAD and RHYTHM channel.
5.) Volume (RHYTHM) -
this is a volume control for the RHYTHM channel only.
6.) Low -
this is the bass control for both channels. This passive shelve adjusts frequencies at 800Hz and below. Turning it
fully clockwise, the signal is unaltered. Turning it counterclockwise, the low will be rolled off -12db
7.) Mid -
this control is a passive midrange control for the amplifier set to 800Hz.Turning it fully clockwise, the signal is
unaltered. Turning it fully counterclockwise, the low will be rolled off -12db.
8.)
High
- this is the high frequency control for both channels. This passive shelve adjusts frequencies at 3K hz and above.
Turning it fully clockwise, the signal is unaltered. Turning it counterclockwise, the low will be rolled off -12db
9.) Effects Volume
- This control increases the effect signal and mixes it with the guitar signal. Turn the control clockwise
to add the desired amount of effects .
10.) Power Indicator
- When lit, the amplifier is turned on and ready for use.
Back Panel
Speaker Output -
This jack is used to deliver the amplified signal to an external speakers. Total minimum load
is 8 ohms. Do not use a load lower than 8 ohms. Damage to the amplifier may result. The amplifier
＇
s internal
speaker is disconnected when this jack is used.
Line Output -
this is a 2 conductor 1/4" line output jack. This will allow an external amplifier or mixing board to be
supplied with the signal from this amp.
Headphone Output - this is a 3 conductor
＂ Ｓ
tereo
＂
The amplifier
＇
s internal speaker is disconnected when this
jack is used.
CD/TAPE
Input - this is a 3 conductor 1/4" that allows playback from a Compact Disc or Tape player.
VOLUME
MID
LOW
HIGH
GAIN
VOLUME
GUITAR
INPUT
VOLUME
KGA10FX
CHANNEL
SELECT
LEAD
RHYTHM
EQUALIZER
EFFECT
1 0 W A T T G U IT A R A M PL I F I E R W/EFFECTS
１
２
３
４
５
６
７
８
９
MODEL
KGA
10FX
AC 120V 25W 60Hz
KUSTOM MUSICAL AMPLIFICATION INC
CINCINNATI, OHIO USA
SERIAL NUMBER
DESIGNED IN USA MADE IN CHINA
0326
RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
ATTENTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CONFORMS TO
UL STD.6500
CERTIFIED TO
CAN/CSA STD.E60065
LINEOUT
SPEAKER
CD/TAPE
INPUT
HEADPHONE
ON
OFF
POWER
FUSE:T200mA L 250V
I
O
C
US
R
R
2001124
LEAD GUITAR AMPLIFIER W/EFFECTS
