Sales (800) 4KUSTOM (800) 458-7866
Customer Service (800) 835-0156
1. move to the
VOLTAGE LEVEL
LED →
SELECT
→
2.
move to “
StL”
→
SELECT
→
3.
choose “
On”/”OFF”
→
SELECT
SPEED
CONTROLLED
FLASH
To engage the speed controlled flash mode, using user interface buttons:
1. move to the
VOLTAGE LEVEL
LED →
SELECT
→
2.
move to “
SCF”
→
SELECT
→
3.
choose “
On”/”OFF”
→
SELECT
STROBES ENABLE
(Option)
To engage the strobes enable mode, using user interface buttons:
1. move to the
VOLTAGE LEVEL
LED →
SELECT
→
2.
move to “
Stb”
→
SELECT
→
3.
choose “
On”/”OFF”
→
SELECT
SETTING THE
DATE/TIME
WARNING
: If you have a traffic counter installed, please make sure (tc) is OFF and reboot the
sign before changing the time or date. This will help avoid corrupting data in an active study.
To change the date and/or time, using user interface buttons:
1. move to the
CLOCK
LED →
SELECT
→
2.
adjust the 2 digit year (00 to 99) →
SELECT
→
3.
adjust the month (01 to 12) →
SELECT
→
4.
adjust the date (01 to 31) →
SELECT
→
5. adjust the hours (00-
23) →
SELECT
→
6.
adjust the minutes (00 to 59) →
SELECT
TRAFFIC COUNTER
POWER
(Option)
To engage the traffic counter enable mode, using user interface buttons:
1. move to the
VOLTAGE LEVEL
LED →
SELECT
→
2.
move to “
tc”
→
SELECT
→
3.
choose “
On”/”OFF”
→
SELECT
TRAFFIC COUNTER
SCHEDULER
ENABLE (Option)
To engage the traffic counter scheduler enable mode, using user interface buttons:
1. move to the
VOLTAGE LEVEL
LED →
SELECT
→
2.
move to “
tcS”
→
SELECT
→
3.
choose “
On”/”OFF”
→
SELECT
STARTING A
TRAFFIC COUNTER
STUDY
(Option)
1. Make sure the traffic counter power is ON. See TRAFFIC COUNTER POWER above.
2. Turn sign OFF then ON again. This will begin a new study.
3. As cars get added to the study, you may notice the blue LED flicker to indicate it has
acquired a target.
STOPPING A
TRAFFIC COUNTER
STUDY
(Option)
1. Turn sign OFF then ON again. This will stop the running study and write it to the
internal memory.
2. If a new study is ready, the blue LED next to the USB port will be flashing.
3. Insert a thumb drive (8GB or less) into the USB
port. “
bSy
” will appear in the display
window.
4.
When “
bSy
” goes away and the blue LED stops flashing, the studies have been
transferred to the thumb drive and it may be removed.
DO NOT REMOVE
thumb drive
while the blue LED is flashing or you could corrupt the thumb drive.
SMART 650 Quick Reference Guide
Part # 006-9009-10 Rev 0
