KUSSMAUL Auto-Pump 091-9B-220, Инструкция по эксплуатации

Страница: 23 / 90

VEHICLE WIRING INSTALLATION
1. The Auto Pump is supplied with a 220/240 volt A.C. line cord and is ready to operate. The
line cord may be plugged into an available outlet or the cord may be cut and permanently
wired to the 220/240 volt A.C. system in the vehicle.
2. The compressor is calibrated to cut-in at 70 PSI and cut-out at 90 PSI . For higher cut-in
and cut-out, turn the range nut clockwise . To lower cut-in turn range nut counterclockwise .
Do not exceed 100 PSI .
COMPRESSOR OUTPUT IS 100 PSI MAXIMUM. DO
NOT EXCEED 100 PSI OR YOU WILL VOID
WARRANTY.
NOTE
THIS PUMP REQUIRES A MINIMUM OF 220
VOLTS FOR OPERATION. AT LOWER VOLTAGES
THE PUMP WILL NOT START
220/240 VOLT
POWER CORD