7/8" DIA.
5/32" DIA.
HOLE TEMPLATE
INDICATOR INSTALLATION
(2)
(2)
LOCK & FLAT WASHER
1. Locate Indicator in a convenient place on the vehicle.
2. Place the template in position and center punch in 3 places.
3. Drill holes as shown.
5. Connect wiring to charger using butt connector supplied.
6. Install as shown.
7. Insert 2 #6-32 screws and tighten, (CAUTION Do not over tighten because
you will bend the plastic bezel and brake the watertight seal).