NOTE
The LOAD MANAGER is designed to operate relays. It is not necessary
The LOAD MANAGER is designed to operate relays. It is not necessary
The LOAD MANAGER is designed to operate relays. It is not necessary
The LOAD MANAGER is designed to operate relays. It is not necessary
The LOAD MANAGER is designed to operate relays. It is not necessary
to connect to all outputs. Any outputs, at the discretion of the installer,
to connect to all outputs. Any outputs, at the discretion of the installer,
to connect to all outputs. Any outputs, at the discretion of the installer,
to connect to all outputs. Any outputs, at the discretion of the installer,
to connect to all outputs. Any outputs, at the discretion of the installer,
may remain unused. Nothing should be connected to the unused
may remain unused. Nothing should be connected to the unused
may remain unused. Nothing should be connected to the unused
may remain unused. Nothing should be connected to the unused
may remain unused. Nothing should be connected to the unused
outputs. Relays must have a coil resistance of 40 ohms or greater.
outputs. Relays must have a coil resistance of 40 ohms or greater.
outputs. Relays must have a coil resistance of 40 ohms or greater.
outputs. Relays must have a coil resistance of 40 ohms or greater.
outputs. Relays must have a coil resistance of 40 ohms or greater.
DO NOT LOAD ANY OUTPUT WITH A RELAY WITH A
DO NOT LOAD ANY OUTPUT WITH A RELAY WITH A
DO NOT LOAD ANY OUTPUT WITH A RELAY WITH A
DO NOT LOAD ANY OUTPUT WITH A RELAY WITH A
DO NOT LOAD ANY OUTPUT WITH A RELAY WITH A
RESISTANCE LESS THAN 40 OHMS
RESISTANCE LESS THAN 40 OHMS
RESISTANCE LESS THAN 40 OHMS
RESISTANCE LESS THAN 40 OHMS
RESISTANCE LESS THAN 40 OHMS
Содержание 091-32R-12
Страница 4: ......
Страница 5: ...Figure 2 Basic Jumper Settings...
Страница 6: ...Figure 3 Outline load Manager...
Страница 7: ...Figure 1 Schematic Load Manager Installation...
