Chassis
Ground
091-28
AIR EJECT
Pressure Switch
Check Valve
Tee Fitting
Indicator
Air to Vehicle
Master Switch
Black
Orange
Red
INSTALLATION INSTRUCTIONS
Model 091-28-IND AIR EJECT INDICATOR
KUSSMAUL ELECTRONICS COMPANY, INC.
170 CHERRY AVENUE, WEST SAYVILLE, NEW YORK, 11796-1221 USA
SINCE 1967, DESIGNERS OF INNOVATIVE PRODUCTS
TEL. In NY:
TOLL FREE:
FAX:
631 567-0314
800 346-0857
631 567-5826
1. Install pressure switch in side of Tee fitting.
2. Install Check Valve in Tee fitting as illustrated, note direction of check valve.
3. Install Tee fitting subassembly in Air Eject as shown.
4. Wire on side of pressure switch to chassis ground with Black Wire.
5. Wire second side of pressure switch to indicator with Orange Wire.
6. Wire second side of indicator to a sw12 volt supply. If it is desired to illuminate the
indicator whenever the air line is connected, even with the master switch OFF, the power
to the indicator may be taken directly from the battery.
November 12, 2004
